XSG Series Chemical use industrial flash dryer with screw feeder
Wet Paste Industrial Flash Dryer , Rotary Drying Equipment With
Screw Feeder XSG Series
Descriptions
XSG Series Chemical use industrial flash dryer with screw feeder is
a new and high-efficiency drying equipment which is researched and
developed for the sake of overcoming the low-efficiency and high
energy-consuming of static drying. In its design, we have developed
advantages and reduced shortcomings of common dryers, to realize
the target of the consuming and high efficiency drying..
Principle of work
Hot air, from the bottom of drier, enters drying chamber with
stirring and crushing device at a suitable atomizing speed. It
exerts strong shearing, blowing, floating and rotating effect to
raw material. Therefore raw material is granulated through
centrifuge, shearing, impacting and friction effect. It strengths
the process of heat exchange. At the bottom of drier, the large and
damp granules are crushed under the action of stirrer. While,
granules that are small in particle and containing less moisture
will be lifted accompanied with revolving air stream. During that
period, it is dried further. Because the two phases gas and solid
of flows in rotating, the inertia of solid phase is more than that
of gas and the relative velocity between solid and gas phases is
large, it strengthens the process of heat exchange. Therefore, the
equipment has big drying capacity.
Features
1. There are many kinds of feeding equipment for choosing, and
feeding is continue and static.
2. At the bottom of dryer, where is high temperature area, heat
sensitive raw material will not contact with heat surface directly,
therefore it solves the carbonized and changed color problems of
heat sensitivity raw material.
3. There are air pressure equipment and shaft cooling equipment, so
longer life.
4. There is special equipment for sharing wind, and raising the
amount of hot air.
5. There are rotational flow pieces inside the drying chamber. It
is used to control the moisture and granules of raw material.
6. Because gas speed at circle inside the drying chamber is high
and the staying time of raw material is short, high efficiency and
quick speed can be realized.
Application
1. Organic compounds: Fenatrol (insecticide of agrochemicals),
cadmium laurate, benzoic acid, germicide, sodium oxalate, cellulose
acetate and so on.
2. Dyestuff: anthraquinone, black ferric oxide, indigo blue
pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds
of intermediate of azo dye-stuff.
3. Inorganic compounds: borax, calcium carbonate, hydroxide, copper
sulfate, ferric oxide, barium carbonate,
antimony trioxide, all kind of metallic hydroxide, all kinds of
heavy metallic salt, synthetic cryolite and so on.
4. Cermics: kaoline, silicone trioxide, caly and so on.
5. Foodstuff: soya protein, agglomerative starch, lees, triticin,
wheat starch and so on.
Technical parameters
| Model | XSG-2 | XSG-4 | XSG-6 | XSG-8 | XSG-10 | XSG-12 | XSG-16 | XSG-20 |
| ID of main machine(mm) | 200 | 400 | 600 | 800 | 1000 | 1200 | 1600 | 2000 |
| Air amount(m3/h) | 350-500 | 1150-2000 | 2450-4500 | 4450-7550 | 7000-12500 | 10000-18000 | 18000-30500 | 50000-78000 |
| Evaporated moisture(kg/h) | 12-17 | 40-70 | 80-150 | 150-250 | 230-420 | 300-600 | 600-1000 | 1000-1500 |
| Max equipped power (kw) | 10 | 20 | 40 | 65 | 85 | 105 | 150 | 230 |
| Max height(m) | 4.0 | 4.8 | 5.8 | 6.4 | 7.1 | 7.8 | 8.5 | 10.1 |
| Occupied area(m2) | 15 | 20 | 28 | 35 | 40 | 52 | 80 | 150 |
Dimension
| Type | Height | Length | Width |
| XSG-4 | 4600 | 5500 | 5000 |
| XSG-6 | 5500 | 6550 | 6000 |
| XSG-8 | 6000 | 7100 | 5600 |
| XSG-10 | 7100 | 8200 | 6700 |
| XSG-12 | 7500 | 8900 | 7000 |
| XSG-14 | 7800 | 10500 | 8500 |
| XSG-16 | 8500 | 14500 | 11000 |
Note: all details above for reference only. Because of material
features, the parameters vary. we have the right to change but not
notice, pardon!
