inner loop and zero release belt type drying machine for leavening
mushroom dreg
Continuous Drying Equipment / Belt Drying Machine For Leavening
Mushroom Dreg
The raw material after washed should be distributed on the conveyer
belt through suitable mechanism such as star distributor, swing
conveyor, crusher or granulator, the conveyer passes through the
channel including of one or several heating unit. Each heating unit
is equipped with air heater and circle system. Each channel has one
or several damp discharge systems. When the conveyer passes through
it, hot air will pass through the raw material from up to down or
from down to up. In this way the raw material can be dried
uniformly.
Application
inner loop and zero release belt type drying machine for leavening
mushroom dreg is an industrial continuous drying equipment . It is widely used for
chemical industry, foodstuff industry( fruit and Fruit or nut ),
pharmaceutical industry, construction materials industry,
electronic industry and so on. Especially it is suitable for drying
raw materials that are good in breathability and have the shape of
pieces or strip of granule. It is also possible to dry the pasted
raw materials such as filter cake after shaped through granulator
or extruder.
Features
1, Air quantity, heating temperature, materials staying time and
feeding speed can be adjusted to achieve the best drying effect.
2, The equipment configuration is flexible, mesh belt washing
system and materials cooling system can be used.
3, Most air is recycled to realize saving energy
4, The machine is equipped with unique air dividing apparatus, it
makes the hot air distribute uniform better and guarantee the
quality of products is constant.
5, Heating source can be steam, conduction oil,, electricity, coal
(oil), or hot air furnace.
Typical Products
inner loop and zero release belt type drying machine for leavening
mushroom dreg is suitable to evaporate vegetables, particle feed, gourmet powder,
fine coconut mash, organic plastics, compound rubber, tacryl fiber,
medicine product, medicine material, small wooden product, plastic
product, aging and solidification for the electronic components and
devices.
DW-A Model belt dryer
Technical Parameters
| Model | DW-1.2-8A | DW-1.2-10A | DW-1.6-8A | DW-1.6-10A | DW-2-8A | DW-2-10A |
| Quantity of unit | 4 | 5 | 4 | 5 | 4 | 5 |
| Width of belt(m) | 1.2 | 1.6 | 2 |
| Length of dry section(m) | 8 | 10 | 8 | 10 | 8 | 10 |
| Thickness of raw material spreading(mm) | 10-80 |
| Operation temperature(℃) | 50～140 |
| Steam pressure(Mpa) | 0.2～0.8 |
| Steam consumption(kg/h) | 120-300 | 150-375 | 150-375 | 170-470 | 180-500 | 225-600 |
| Dry time(h) | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 |
| Dry capacity(kg water/h) | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 |
| Quantity of fan | 5 | 6 | 5 | 6 | 5 | 6 |
| Total equipped power inside(kw) | 9.9 | 12.1 | 9.9 | 12.1 | 18.2 | 22.2 |
| Total equipped power(kw) | 11.4 | 13.6 | 11.4 | 13.6 | 19.7 | 23.7 |
| Overall dimensions | L(m) | 9.77 | 11.77 | 9.77 | 11.77 | 9.77 | 11.77 |
| W(m) | 1.5 | 1.5 | 2.24 | 2.24 | 2.66 | 2.66 |
| H(m) | 2.83 | 2.83 | 2.83 | 2.83 | 3.50 | 3.50 |
| Weight(kg) | 4800 | 5780 | 5400 | 6550 | 6350 | 7800 |
| | | | | | | | |
Explanation:
1. Evaporation rate mainly depends on the area of drying section,
which is designed according to details of raw material. While, the
width is often relative fixed value,1.2m, 1.6m,2.0m to choose.
2. The vaporized amount of water should be assured in accordance
with the dry temperature, thickness of raw material spreading and
stay time.
3. The dimension is just for reference.
